Seat Cushion Side Shields - Lower Outboard Shields - Second Row

SEAT CUSHION SIDE SHIELDS - LOWER OUTBOARD SHIELDS - SECOND ROW STOW AND GO

REMOVAL

1. Remove seat upper cushion side shield.
2. Lift lock tab on inside of recliner handle with screw driver or special too C-4755. Slide Recliner handle forward off arm.
3. Remove rear attaching screw, two side attaching screws and two cup holder attaching screws.
4. Remove O/B lower cushion side shield.

INSTALLATION

1. Place O/B lower cushion side shield into position.
2. Place cup holder into position (if removed previously) and install two cup holder attaching screws.
3. Install rear attaching screw and two side attaching screws.
4. Slide recliner handle rearward onto arm until lock tab engages.
5. Install seat upper cushion side shield.