Torque Specifications

Tighten bolts (1-10) to 41 Nm (30 ft. lbs.)
Tighten bolts (1-10) again to 41 Nm (30 ft. lbs.)

CAUTION: Do Not use a torque wrench for the following step.

Turn bolts (1-10) an additional 1/4 turn
Engine block bolts (11-20) torque each bolt to 28 Nm (250 inch lbs.)
Tighten bolts (11-20) to 28 Nm (250 inch lbs.)
Crankshaft turning torque. Not to exceed 5.6 Nm (50 inch lbs.).

Tighten in sequence shown in (Fig. 9)