Interior - Rattle From Steering Wheel
NUMBER: 19-007-05 REV. AGROUP: Steering
DATE: September 30, 2005
THIS BULLETIN SUPERSEDES SERVICE BULLETIN 19-007-05, DATED AUGUST 12, 2005, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES AN ADDITIONAL MODEL YEAR AND A REVISED APPLICABILITY DATE
SUBJECT:
Rattle Sound From Steering Wheel Area
OVERVIEW:
This bulletin involves installing an empty wiring track.
MODELS:
2005 - **2006** (RS) Town & Country/Caravan
2005 - **2006** (RG) Chrysler Voyager (International Markets)
NOTE:
This bulletin applies to vehicles WITHOUT Speed Control (sales code NHM) built on or before **September 26, 2005 (MDH0926XX)**.
SYMPTOM/CONDITION:
Rattle Sound From Steering Wheel Area
DIAGNOSIS:
If the Symptom/Condition is present, perform the Repair Procedure.
PARTS REQUIRED:
REPAIR PROCEDURE:
WARNING:
Wait two minutes after disconnecting the battery for the system reserve capacitor to discharge before beginning any airbag component service. Personal injury or death may result.
1. Remove the driver's airbag. Refer to the detailed removal procedures available in TechCONNECT, under: Service Info, 8 - Electrical, Restraints, Driver Airbag, Removal.
2. Install the wire track, p/n 05189397AA, on the back of the driver's air bag, on the four studs (Fig. 1).
3. Install the driver's air bag in the vehicle. Refer to the detailed installation procedures available in TechCONNECT, under: Service Info, 8 - Electrical, Restraints, Driver Airbag, Installation.
WARNING:
Do not connect the battery negative cable! Refer to the detailed service information available in TechCONNECT, under: Service Info, 8 - Electrical/Restraints - Diagnosis And Testing - Airbag System. Personal injury or death may result if the system test is not performed first.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.