Carpet Trim Ring and Cover - Fold - In - Floor
CARPET TRIM RING AND COVER - FOLD - IN - FLOORREMOVAL
1. Move front seats to the full forward position.
2. Fold the second row seats into the floor.
Fig. 10:
3. Remove the load floor plugs (Fig. 10).
4. Remove the ten weld nuts.
Fig. 11:
5. Open door covers (Fig. 11).
Fig. 12:
6. Remove the four inter weld nuts (Fig. 12).
7. Raise the front trim ring and cover up off of the weld studs and remove from vehicle.
INSTALLATION
1. Place front trim ring and cover assembly into position.
2. Open door covers (Fig. 11).
3. Install the four inter weld nuts (Fig. 12).
4. Close door covers.
5. Install the ten weld nuts (Fig. 10).
6. Install the eight load floor plugs.
7. Open the second row seats into position.
8. Move front seats to the position.