Luggage Rack Crossbar

LUGGAGE RACK CROSSBAR

REMOVAL

1. Remove luggage rack front risers.

Fig. 20:

2. Depress stanchion levers down until they click into the unlock position. (Fig. 20). Work from side to side sliding the crossbar assembly forward moving a little at a time to ensure it remains perpendicular to the side rails.
3. Remove crossbar from vehicle.

INSTALLATION

NOTE: The crossbar assemblies are designed to be installed in only one way. Check top and bottom surfaces of the crossbar for the word FRONT and directional arrows. The directional arrows must point toward the front of the vehicle.

1. Place crossbar in position on vehicle.
2. Work from side to side sliding the crossbar assembly back a little at a time to ensure it remains perpendicular to the side rails.
3. Position first crossbar assembly crossbar at the second most rearward locator holes. Press the top of the stanchion lever to lock it into position.
4. Position the second crossbar assembly in the second hole from the front. Lock into place.
5. Place luggage rack riser into position.
6. Install two fasteners into riser. Tighten fasteners to 4 mm (35 in.lbs.) torque.