Bench Seat Back Panel

BENCH SEAT BACK PANEL

REMOVAL

1. On third row seats remove plastic grocery bag retainer.

Fig. 87:

2. Using a fork type prying tool (C4829) on three pass seats, disengage push-in fasteners holding seat back cover to seat back frame and remove seat back cover from seat. (Fig. 87).

Fig. 88:

3. Using a fork type prying tool (C4829) on two pass seats, disengage push-in fasteners holding the upper corners and lower edge of the seat back panel to seat back frame and remove seat back cover from seat by pulling the lower edge out away from the seat back to disengage the upper two hooks. (Fig. 88).

INSTALLATION

1. On three pass seats place seat back panel in position on seat and install the push-in fasteners (Fig. 87).
2. On two pass seats engage the two upper hooks of the panel, place the panel into position and install the push-in fasteners (Fig. 88).
3. On third row bench seats install grocery bag holder.