Blend/Mode/Recirc Door Operation Improper - Dual & Three-Zone MTC

Test 1 - Test 3:

Test 4 - Test 6:

Test 7 - Test 9:

Test 10:

SYMPTOM
BLEND/MODE/RECIRC DOOR OPERATION IMPROPER - DUAL & THREE-ZONE MTC

POSSIBLE CAUSES
- Check for actuator circuit test fault messages
- Check for active HVAC DTCS
- Check for HVAC door recalibration fault messages
- Mode door actuator/linkage/door
- Passenger blend door actuator/linkage/door
- Driver blend door actuator/linkage/door
- Recirculation door actuator/linkage/door
- Rear mode door actuator/linkage/door
- Rear blend door actuator/linkage/door