Brake Pedal Assy: Description and Operation
PEDALDESCRIPTION
NOTE: The brake pedal is serviced as a complete assembly including the bracket.
A suspended-type brake pedal (5) is used. The pedal is attached to the pedal support bracket (1) with a pivot shaft pin (2), bushings (3) and clips (4). If the bushings (3) become dry a spray lubricant can be used to eliminate noises. The booster push rod is attached to the pedal with a clip. The pedal (5), bushings (3), pivot pin (2) and support bracket (1) are not serviceable components.
OPERATION
The brake pedal is attached to the booster push rod. When the pedal is depressed, the primary booster push rod is depressed which move the booster secondary rod. The booster secondary rod depress the master cylinder piston.