Support-Front Fascia

SUPPORT-FRONT FASCIA

REMOVAL




1. Remove the support bracket.
2. Remove the four nuts (1 and 3) securing the fascia support (4) to the frame tips (2).
3. Remove the support (4).

INSTALLATION




1. Install the fascia support (4) and install the right (1) and left (3) nuts.
2. Tighten the nuts to 95 N.m (70 ft.lbs.).
3. Install the fascia support bracket.
4. Check front fascia gap and flush positioning. Refer to Body and Frame / Specifications / Dimensions.
5. Loosen the nuts (1 and 3) and adjust the front fascia to specifications.
6. Tighten the nuts to 95 N.m (70 ft.lbs.).