Operation CHARM: Car repair manuals for everyone.

Front Suspension

STABILIZER BAR

REMOVAL





1. Remove the stabilizer link (1) upper nut and remove the retainers and grommets.
2. Remove the stabilizer bar retainer bolts (2) also remove the retainers from the frame sway bar and remove the bar (3).
3. If necessary, remove the bushings from the stabilizer bar.

INSTALLATION
1. If removed, install the bushings on the stabilizer bar.





2. Position the stabilizer bar (1) on the frame crossmember brackets and install the bracket (3) and bolts (2) finger-tight.

NOTE: Check the alignment of the bar to ensure there is no interference with the either frame rail or chassis component. Spacing should be equal on both sides.

3. Install the stabilizer bar (1) to the stabilizer link and install the grommets and retainers.
4. Install the nuts (6) to the stabilizer link and tighten to 23 Nm (17 ft. lbs.).
5. Tighten the bracket bolts (2) to the frame to 61 Nm (45 ft. lbs.).