Seat-Club Cab - Rear

SEAT-CLUB CAB - REAR

REMOVAL






NOTE: The seat back is part of the cab back trim panel. Refer to Trim Panel for the appropriate removal procedure.




1. Remove the cab back trim panel, Refer to Trim Panel.
2. Remove the fasteners (3) attaching rear seat cushion hinge to cab back panel (2).
3. Separate rear seat cushion (4) from vehicle.

INSTALLATION






NOTE: The seat back is part of the cab back trim panel. Refer to Trim Panel for the appropriate installation procedure.




1. Position the rear seat cushion (4) in the vehicle.
2. Install the fasteners (3) attaching the rear seat cushion hinge to cab back panel (2).
3. Tighten the fasteners to 34 N.m (25 ft.lbs.).
4. Install the cab back trim panel.