B1201

B1201-AIRBAG WARNING INDICATOR CIRCUIT HIGH

WHEN MONITORED
With the ignition on and when requested to turn on by the Occupant Restraint Controller (ORC).

SET CONDITION
The Instrument Cluster software detects the voltage across the Airbag Lamp is above 5.0 volts when ON.

POSSIBLE CAUSES
- Instrument cluster

Diagnostic Test

1. CHECK THE INSTRUMENT CLUSTER FOR DTC B1201-AIRBAG WARNING INDICATOR CIRCUIT HIGH

NOTE: The Instrument Cluster performs internal tests on the Airbag Lamp during each ignition cycle.

With the scan tool, erase DTCs.
Turn the ignition off, wait 10 seconds, then turn the ignition on
Wait for the Instrument Cluster to perform the bulb check.
With the scan tool, read DTCs.

Q: Did the DTC B1201-AIRBAG WARNING INDICATOR CIRCUIT HIGH reset?

YES: Replace and program the Instrument Cluster. Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test
NO: Test complete.