Power Liftgate

B210E - BATTERY VOLTAGE HIGH - DDM/PDM

WHEN MONITORED
At all times.

SET CONDITION
Anytime the module senses voltage input above 16 volts, this code will set.

POSSIBLE CAUSES
- High voltage engine DTC
- Power liftgate module

Diagnostic Test

1. CHECK ENGINE DTC's

With the scan tool, read ENGINE DTC's

Q: Are there any ENGINE DTC's present?

NO: Go To 2
YES: Refer to symptom list for problems related to ENGINE.

2. TEST FOR INTERMITTENT CONDITION

With the scan tool, record and erase DTC's
Start the engine and run for two minutes.
With the scan tool, read DTC's.

Q: Does the scan tool display B210E-BATTERY VOLTAGE HIGH?

YES: Replace the Power Liftgate Module. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test
NO: The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test