B224E

B224E - POWER LIFTGATE MODULE INTERNAL

WHEN MONITORED
Whenever the battery is connected.

SET CONDITION
When the module senses an internal problem, this code will set.

POSSIBLE CAUSES
- Trouble code present
- Power liftgate module

Diagnostic Test

1. DTC PRESENT

With the scan tool, record and erase DTC's.
Cycle the ignition switch from On to Off.
Wait 30 seconds.
Turn the ignition on.
With the scan tool, read DTCs.

Q: Does the scan tool display POWER LIFTGATE MODULE INTERNAL?

NO: Operate the power liftgate open and closed several times. With the scan tool, read DTC's. If this code appears, replace the Power Liftgate Module. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test
YES: Replace the Power Liftgate Module. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test