Front Seat Riser - Manual
RISER-FRONTREMOVAL
Manual Length Adjuster
1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats / Service Precautions.
2. Remove the seat.
3. Move the seat to the forward position on the tracks and remove the seat adjuster bolts/nuts (3).
4. Move the seat to the reward position on the tracks and remove the front seat adjuster bolts/nuts (3).
NOTE: Passenger seat with strain gauges shown, drivers side seat similar.
5. Disconnect strain gauge electrical connectors (1), if equipped.
6. If equipped, remove the strain gauge bolts (2) and remove the strain gauges as necessary.
INSTALLATION
Manual Length Adjuster
1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats / Service Precautions.
NOTE: Passenger seat with strain gauges shown, drivers side seat similar
2. If equipped, install the strain gauges and install the bolts (2).
3. Tighten the bolts to 40 N.m (30 ft.lbs.).
4. If necessary, connect the electrical connections (1).
5. Move the seat to the forward position on the tracks and install the rear seat adjuster bolts/nuts (3).
6. Tighten the bolts to 45 N.m (33 ft.lbs.).
7. Move the seat to the reward position on the tracks and install the front seat adjuster bolts/nuts (3).
8. Tighten the bolts to 45 N.m (33 ft.lbs.).
9. Install the seat.