Procedures

CHIME

REMOVAL




1. Open the liftgate.
2. Disconnect and isolate the battery negative cable.
3. Using a trim stick C-4829-A or equivalent, separate the pushpin fasteners and remove the upper trim panel (2).




4. Disconnect the chime electrical connector (2).
5. Unsnap the chime (3) from the liftgate (1) and remove from the vehicle.

INSTALLATION




1. Snap the chime assembly (3) onto the liftgate (1).
2. Connect the wire connector (2).




3. Position the upper trim (2) into place and seat the push pin fasteners fully.
4. Connect the battery negative cable.