Front Seat Adjusters - Manual

ADJUSTERS-FRONT

REMOVAL

1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats / Service Precautions.
2. Remove the seat cushion as necessary.

Manual




1. Remove the spring clip.




2. Squeeze the towel bar together and pull the towel bar out of the left and right seat tracks.




3. Remove the bolts (1 & 4), nuts (6) and spacers (2) and separate the side member assembly (3) from the length adjuster assembly (5).

INSTALLATION

Manual




1. Install the seat risers.
2. Position the side member assembly (3) onto the length adjuster assembly (5) and install the nuts (6), bolts (1 & 4) and spacers (2) on the inboard side.
3. Tighten the bolts to 42 N.m (31 ft.lbs.).




4. Squeeze the towel bar together and insert the ends into the bushings on both tracks.




5. Install the spring clip.
6. Install the seat cushion and install the seat.