Control Arm-Upper

CONTROL ARM-UPPER
REMOVAL





1. Raise and support the rear axle.
2. Remove the upper control arm bolt (3) and flag nut (4) at the axle (5).
3. Remove the upper control arm bolt and flag nut at the frame side (1).
4. Remove the upper control arm (2) from the vehicle.

INSTALLATION





1. Install the upper control arm (2) to the vehicle.
2. Install the upper control arm bolt and flag nut (1) at the frame.
3. Install the upper control arm bolt (3) and flag nut (4) at the axle (5).
4. Lower the vehicle to the ground and then tighten the bolts to 156 Nm (115 ft. lbs.).