Cushion/Cover-Cushion - Second Row
CUSHION/COVER-CUSHION - SECOND ROWREMOVAL
Center
1. Fold both outer seats forward.
2. Remove the side shields.
3. Remove the four cushion bolts (2) and seat belt anchor (1) and remove the seat back assembly.
4. Separate the J-straps (1 & 2) and remove cover/ cushion from the frame.
Outer
1. Remove the seat back.
2. Remove the outboard hinge bolts and remove the connector tube and hinge from the seat.
3. Remove the inboard hinges bolts and hinge.
4. Turn the hinge pin (3) clockwise and disengage from the retaining tabs (2).
5. With pin (1) released from the retaining tabs, tap pin out of the spring (2) and remove.
6. Twist the seat cushion assembly up and out of the outboard hinge (1) and disengage from the inner hinge (2) and remove seat.
7. Remove the seat cushion cover and foam from the seat frame.
INSTALLATION
Center
1. Connect the J-straps (1 & 2).
2. Install the seat belt anchor (1) and four cushion bolts (2).
3. Install the side shields.
Outer
1. Install the seat cushion/cover over the seat frame.
2. Position the seat cushion assembly into the vehicle and engage inboard hinge (2).
3. Rotate seat down and engage the outboard hinge (1).
4. Insert the hinge spring (1) and insert the pin (2).
5. Turn the hinge pin (3) and engage the pin into the retaining tabs (2).
6. Install the inboard hinges and bolts.
7. Install the connector tube/outboard hinge assembly into the seat cushion and install the bolts.
8. Install the seat back assembly.