Bench Seat Riser - 50 / 50 Split Flat Floor

BENCH SEAT RISER -50/50 SPLIT FLAT FLOOR

REMOVAL

1. Remove the seat from the vehicle.

Fig. 89:

2. Unclip the seat cushion cover J-strap. (Fig. 89).
3. Remove the six bolts and remove the riser.

INSTALLATION

1. Place the riser onto the seat install the bolts and tighten to 48 N.m (35 ft.lbs.) torque.
2. Clip seat cushion cover J-strap onto the riser.
3. Install the seat into the vehicle.