Bucket Seat Back

BUCKET SEAT BACK - QUAD BUCKET

REMOVAL

NOTE: Quad seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat open.

1. Remove the headrests.
2. Remove the armrests, if equipped.
3. Remove the seat back hinge covers.

Fig. 79:

4. Disconnect the child seat synchronizer cable, if equipped. (Fig. 79)

Fig. 80:

5. Remove the seat back frame bolts and remove the seat back. (Fig. 80)

INSTALLATION

1. Install the seat back.
2. Install the shoulder bolts attaching the seat back hinge to the seat back frame and tighten to 48 N.m (35 ft.lbs.) torque.
3. Connect the child seat synchronizer cable, if equipped.
4. Install the seat back hinge covers.
5. Install the armrests.
6. Install the headrest.
7. Verify seat back operation.