Shafts Axle

SHAFTS AXLE

REMOVAL
1. Remove half shaft from vehicle.
2. Clean axle seal area.





3. Remove O-ring (1) and snap ring (2) from axle shaft (3).





4. Remove axle with Remove 8420A (2,3,4) and Slide Hammer C3752.

INSTALLATION
1. Lubricate bearing bore and seal lip with gear lubricant.
2. Install axle shaft with new snap ring and verify axle shaft snap ring is seated in side gear.





3. Install o-ring (1) and snap ring (2) on axle shaft (3).
4. Install half shaft.
5. Verify differential fluid level and add fluid if necessary.