Antenna Cable - Instrument Panel

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the glove box.
3. Remove the instrument panel center bezel.
4. Remove the instrument panel lower right center bezel.

CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.

6. Disconnect the antenna cable by pulling the locking antenna connector away from the radio.




7. Remove antenna cable from instrument panel by pulling on retaining fasteners.

INSTALLATION




1. Install antenna cable (1) to instrument panel by pressing retaining fasteners into position.
2. Connect instrument panel antenna cable to antenna body and cable (2).
3. Install radio.
4. Install the instrument panel lower right center bezel.
5. Install the instrument panel center bezel.
6. Install the glove box.
7. Connect the battery negative cable.