Removal and Installation Automatic Transmission
REMOVAL AUTOMATIC TRANSMISSION1. With vehicle in neutral, position vehicle on hoist.
2. Position a lift under axle and secure axle to lift.
3. Remove all brake components.
4. Remove axle vent hose.
5. Mark propeller shaft and companion flange for installation alignment reference.
6. Remove propeller shaft.
7. Remove shock absorbers (3) from axle (2).
8. Remove U-bolts (5) from axle.
9. Remove axle from the vehicle.
INSTALLATION AUTOMATIC TRANSMISSION
1. Raise axle with lift and align to the leaf spring centering bolts.
2. Install axle U-bolts (5) and tighten to specifications.
3. Install shock absorbers (3) to axle (2) and tighten to specifications.
4. Install all brake components.
5. Install axle vent hose.
6. Install propeller shaft with reference marks aligned and tighten to specification.
7. Fill differential to specifications.