Lighting - Multi-Function Switch Malfunctions
NUMBER: 08-011-09GROUP: Electrical
DATE: July 8, 2009
SUBJECT:
Multifunction Switch Malfunction - Extended Warranty X20
OVERVIEW:
This bulletin involves replacing the multifunction switch if found inoperative or operating incorrectly.
MODELS:
2006 D1/DX Ram Pickup 3500 / Cab Chassis
SYMPTOM/CONDITION:
Some customers may experience a turn signal switch malfunction that will cause the turn signals to flash incorrectly. When selecting a right turn, the left flashers will function and when selecting a left turn, the right flashers will function.
DIAGNOSIS:
If the multifunction switch is found malfunctioning, Perform the Repair Procedure.
PARTS REQUIRED:
REPAIR PROCEDURE:
NOTE:
Procedures to replace the Multifunction Switch have been revised to remove / install switch from bracket as compared to replacing the assembly. Steering wheel removal is no longer required.
1. Following the procedures in DealerCONNECT > TechCONNECT - Group 8 > Lamps & Lighting > Lamps & Lighting Exterior > Switch, Multifunction, replace the multifunction switch with pn CNH3X200AA.
POLICY:
Reimbursable within the provisions of the warranty.
NOTE:
This Service Bulletin falls under extended Warranty Bulletin X20.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.