Power Seat Switch: Testing and Inspection

For complete circuit diagrams, refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.

1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.

Power Seat Switch Test Table:

3. Using an ohmmeter to test the continuity of the power seat switches in each position. Refer to the POWER SEAT SWITCH TEST TABLE. If OK, refer to Power Seat Track/Testing and Inspection. If not OK, replace the inoperative power seat switch.