Instrument Panel Antenna Cable

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the A-pillar trim .
3. Remove the portion of the headliner over the front seat passengers .
4. Disconnect the antenna and electrical connections near the windshield.
5. Remove the glove box.
6. Remove the radio.

Instrument Panel Antenna Cable:

7. Cut both ends of existing cable close to the instrument panel.

INSTALLATION
1. Insert new cable through glove box opening to the radio opening in the instrument panel.
2. Route cable up the A-pillar and connect to the antenna body and cable.
3. Connect the antenna and electrical connections near the windshield.
4. Attach antenna cable to instrument panel wire harness.
5. Install glove box .
6. Install the headliner .
7. Install the A-pillar trim.
8. Install the radio.
9. Connect the battery negative cable.