Center Mounted Brake Lamp: Service and Repair

CENTER HIGH MOUNTED STOP LAMP UNIT

REMOVAL
1. Disconnect and isolate the battery negative cable.

Center High Mounted Stop Lamp Removal/Install:

2. Remove the two screws that secure the CHMSL unit to the vehicle.
3. Pull the CHMSL unit away from the vehicle far enough to access and disconnect the vehicle wire harness from the lamp pigtail wire connector.
4. Remove the CHMSL unit from the vehicle.

INSTALLATION
1. Position the CHMSL unit close enough to the vehicle to reconnect the lamp pigtail wire connector to the vehicle wire harness.
2. Position the CHMSL unit to the vehicle.
3. Install and tighten the two screws that secure the CHMSL unit to the vehicle.
4. Reconnect the battery negative cable.