Installation

INSTALLATION





Figure 1
1. Install antenna base to underside of front fender.

2. Install cap nut holding antenna base to front fender.

3. Install antenna mast to antenna base Ensure that the antenna mast is fully seated on antenna base, and that there is no gap between the mast and base.

4. Install front wheelhouse splash shield.

5. Install front wheel.

6. Lower vehicle.

7. Push antenna cable through opening in hinge pillar.

8. Insert rubber grommet into door hinge pillar.

9. Install kick panel.

10. Connect antenna cable connector to extension cable.

11. Install glove box to instrument panel.

12. Connect the battery negative cable.