Installation

INSTALLATION
1. Place fender in position on vehicle.

2. From inside engine compartment, start the center upper rail bolt. install all the bolts attaching fender to upper rail and tighten.

3. Install fender to lower cowl panel bolt.

4. Install fender to rocker panel bolt.

5. Place fascia into position.

6. Install hood/remove support.

7. Install outboard cowl grille/fender bracket screw and install antenna right side only.

8. Install fender to fascia nuts.

9. Install inner splash shield.

10. Install mud guard.

11. Install headlamp assembly.

12. Check fender for flush and gap.