Installation

INSTALLATION
1. Place rear seat into position (Figure 1).






Figure 1 THIRD ROW SEAT INSTALLED





2. Install rear attaching bolts to seat (Figure 2). Tighten bolts to 89 Nm (66 ft. lbs.) torque and follow tightening sequence.






Figure 2 THIRD ROW SEAT





3. Fold the rear seat into the floor well.

4. Install attaching bolts (Figure 3). Tighten bolts to 58 Nm (43 ft. lbs.) torque.

5. Place the rear seat lower trim cover into position and press clips into the lock position (Figure 4).






Figure 3 THIRD ROW SEATS










Figure 4 ANCHOR MOLDING





6. Raise third row seat into upright position.