Installation

INSTALLATION
1. Install RH & LH, seat tracks to riser with three screws, each track. Tighten to 45 Nm (33 ft-lbs) torque to seat raiser (Figure 4).

2. Install adjuster towel bar handle.

3. Place cushion frame into position on seat tracks (Figure 2).

4. Install six cushion frame nuts. Tighten to 30 Nm (22 ft-lbs) torque (Figure 3).

5. (Figure 1).

6. Install seat back frame.

7. Install seat cushion cover and foam.

8. Install back frame/recliner assembly using two bolts on each recliner. Tighten bolts to 55 Nm (40 ft-lbs) torque

9. Install seat flipper side shields.

10. Install seat lower cushion side shields inboard and outboard.

11. Install seat upper cushion side shields.

12. Install seat into vehicle.





Figure 1 SEAT CUSHION FRAME ASSEMBLY










Figure 2 SECOND ROW SEAT RISER










Figure 3 SEAT CUSHION FRAME AND TRACK ASSEMBLY










Figure 4 SEAT TRACK