Removal

REMOVAL
1. Remove the seat from vehicle.

2. Place seat assembly upside down in the folded seat position on a clean bench surface.

3. Rotate the front inboard leg down in the stow position by hand

4. Using a flat bladed tool, remove the leg cover from the seat leg (Figure 1).






Figure 1 REMOVING FRONT LEG COVER





5. Remove cable end clip by prying up on the base of the clip (Figure 2) and (Figure 3).






Figure 2 REMOVING CABLE END CLIP










Figure 3 CABLE PULLEY





6. Remove steel pulley by prying the pulley toward the front of the seat (Figure 4).






Figure 4 REMOVING PULLEY





7. Remove eyelet clip from the spring at the back of the seat, located in the rear leg (Figure 5).






Figure 5 TENSION SPRING
8. Remove spring from the rear foot.

9. Remove cable from retainer at the base of the rear foot (Figure 6).






Figure 6 REMOVING CABLE FROM THE RETAINER





10. Remove tie strap securing cable housing (Figure 7).

11. Remove cable from seat.






Figure 7 TIE STRAP LOCATION