Installation

GAS ENGINES




Figure 1 A/C Condenser - 2.4L/3.3L/3.8L Engines






1. Be sure the air seal is in position before radiator is installed. Slide radiator down into position. Seat the radiator with the rubber isolators into the mounting holes provided, with a 10 lbs. force.
2. Position air conditioning condenser onto the radiator lower mounts and engage upper mounting tabs.(Figure 1).
3. Install the radiator upper and lower hoses.
4. Connect the coolant reserve/recovery hose.
5. Connect the vapor purge solenoid to the mounting bracket.
6. Install the radiator fans.
7. Install the radiator upper crossmember support.
8. Fill the cooling system.
9. Connect negative cable to battery.