Installation

INSTALLATION
1. Position the air cleaner housing into the engine compartment and engage the housing to the fresh air duct and the mounting stud. Make sure the housing is properly engaged to the duct and stud.
2. Install the bolt that secures the air cleaner housing to the upper radiator support. Tighten the bolt securely.
3. Connect the air inlet hose to the throttle body and tighten the hose clamp. Make sure the hose is fully installed to the throttle body and that the clamp is tight.
4. Connect the PCV fresh air hose to the air cleaner housing cover.
5. Connect the engine wire harness connector to the inlet air temperature sensor.
6. Reconnect the negative battery cable.