Description

DESCRIPTION

FRONT WIPER/WASHER SYSTEM


The windshield wipers can be operated with the windshield wiper switch when the ignition switch is in the RUN or ACCESSORY positions. The windshield wiper system is protected by a 30 amp fuse (9) located in the Power Distribution Center (PDC) part of the Integrated Power Module (IPM) in the engine compartment. The wiper/washer switch is integral to the multi-function switch. It is a resistive MUX switch that sends inputs to the BCM to operate the wiper/washer system.


REAR WIPER/WASHER SYSTEM


The rear windshield wiper and washers can be operated when the ignition switch is in the RUN position.


If equipped with Manual Temperature Controls (MTC), the rear wiper/washer switch is integral to the HVAC control unit. It replaces what was formerly the ON/OFF switch. If equipped with Automatic Temperature Controls (ATC), the rear wiper/washer switch is located on the accessory switch panel in the center stack of the instrument panel.