Installation

INSTALLATION
1. Install the air intake pipe assembly and install the two retaining screws. Tighten the screws to 7 Nm (62 in.lbs.).

2. Attach the steel tube to the flexible tube and position and then tighten the retaining clamp securely.

3. Install the flexible tube to the cabin heater air intake and install and tighten the retaining clamp securely.

4. Install the cabin heater tubes to the lower heater connection and the lower EGR cooler connection and tighten the retaining clamps.

5. Lower the vehicle.

6. Refill the engine cooling system.

7. Verify function of the heater unit.