Description

DESCRIPTION

The rear wheel bearing and rear wheel hub of this vehicle are a one-piece sealed unit, or hub and bearing unit type assembly (Unit III). The hub and bearing is mounted to the center of the rear axle using four mounting bolts. It has five wheel mounting studs on the hub flange.


Front-Wheel-Drive vehicles with antilock brakes have an internally mounted wheel speed sensor and tone wheel. This hub and bearing can be identified by the rounded cap and molded in connector on the rear of the assembly (Figure 1). The sensor and tone wheel cannot be serviced separately from the hub and bearing.





Figure 1 HUB AND BEARING - FWD WITH ABS