Description

DESCRIPTION




Figure 1 Underdrive and Overdrive Accumulators







The 41TE underdrive, overdrive, low/reverse, and 2/4 clutch hydraulic circuits each contain an accumulator. An accumulator typically consists of a piston (2), seal rings (3) return spring(s) (1) (Figure 1) and a cover or plug. The overdrive and underdrive accumulators are located within the transaxle case, and are retained by the valve body.





Figure 2 Low/Reverse Accumulator







The low reverse accumulator (1) (Figure 2) is also located within the transaxle case, but the assembly is retained by a cover and a snap-ring.





Figure 3 2/4 Accumulator Assembly







The 2/4 accumulator is located in the valve body (1) (Figure 3). It is retained by a cover and retaining screws.