Removal

REMOVAL
1. Remove front wheelhouse splash shield. Refer to Front Fender Liner.

2. Disengage clips attaching door harness wire connector to inner fender brace.

3. Disconnect positive lock slide on the side of the wire connectors (Figure 1).

4. Depress lock tab attaching wire connector halves together.

5. Disconnect door harness from body wiring harness.

6. Remove bolts attaching door check strap to A-pillar (Figure 2).

7. Support door on suitable lifting device.

8. Remove bolts attaching lower hinge to door end frame (Figure 3).

9. Steady door on lifting device and remove bolts attaching upper hinge to door end frame.

10. Remove door from vehicle.






Figure 1 FRONT DOOR WIRING TO BODY










Figure 2 FRONT DOOR - HINGE PIN REMOVAL










Figure 3 FRONT DOOR - HINGE BOLT REMOVAL