Operation CHARM: Car repair manuals for everyone.
Home >> Dodge or Ram Truck >> 2007 >> Dakota 2WD V8-4.7L VIN P Flex Fuel >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Module-Front Control >> Installation

Installation






INSTALLATION




1. Connect the Power Distribution Center (PDC) (3) to the Front Control Module (FCM) by lining up the electrical connector and pushing the two together.

2. Install the four fasteners (2) securing the FCM (1) to the PDC (3).

3. Install the Integrated Power Module (IPM).

4. Connect the battery negative cable.
pro multis · About Operation CHARM