Installation

INSTALLATION

When servicing throttle body components, always reassemble components with new O-rings and seals where applicable. If assembly of component is difficult, a light coat of engine oil may be applied to the O-RINGS ONLY (Figure 1) to aid assembly. Use care when removing hoses to prevent damage to hose or hose nipple.






Figure 1 O-RINGS





1. Carefully place idle air control motor into throttle body.

2. Install mounting screw. Tighten screw to 7 Nm (62 in. lbs.) torque.

3. Connect electrical connector to idle air control motor.

4. Connect negative cable to battery.