Description

DESCRIPTION

The 4XTE underdrive, overdrive, low/reverse, and 2/4 clutch hydraulic circuits each contain an accumulator. An accumulator typically consists of a piston, seals, return spring(s), and a cover or plug. The overdrive and underdrive accumulators are located within the transaxle case, and are retained by the valve body (Figure 1).





Figure 1 Underdrive and Overdrive Accumulators







The low reverse accumulator (Figure 2) is also located within the transaxle case, but the assembly is retained by a cover and a snap-ring.





Figure 2 Low/Reverse Accumulator


The 2/4 accumulator is located in the valve body. It is retained by a cover and retaining screws (Figure 3).





Figure 3 2/4 Accumulator Assembly