Auto (Rolling) Door Locks Inoperative

*AUTO (ROLLING) DOOR LOCKS INOPERATIVE

For a complete wiring diagram refer to Diagrams/Electrical.






Diagnostic Test

1. CHECK THE DOOR AJAR SWITCH STATUS

Ensure all doors are closed.

With the scan tool, observe all of the Door Ajar states.

Does the scan tool display CLOSED or YES for any door ajar state?

Yes

- Repair the Door Ajar Circuit as necessary.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Go To 2

2. ANY TPS OR VSS RELATED DTC's

With the scan tool read "Engine" and "Anti-Lock Brakes" DTC's.

Does the scan tool display any Throttle Position Sensor or Vehicle Speed Sensor related DTC's?

Yes

- Diagnose and repair the DTC's:
- For engines refer to Electricals and Diagnostics
- For Anti-Lock Brake.

No

- Go To 3

3. ENABLE AUTO DOOR LOCKS

With the scan tool, observe the rolling door lock status.

Does the scan tool display ROLLING DOOR LOCKS: "ENABLED"?

Yes

- Replace the Instrument Cluster.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- With the scan tool enable the Auto Door Locks.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test