Removal

REMOVAL




1. Before proceeding with the following repair procedure, review all warnings and cautions.


NOTE: Do not reuse the seat fasteners, always replace with new ones.

2. Remove and discard the front bolts (4).

3. Position the seats forward, remove the rear bolts (2) and discard.

4. Disconnect the 12v power supply electrical connector (3 - if equipped).





5. Fold the seat backs forward and roll the seat assembly (1) back in the vehicle.

6. Remove the nuts (2 and 4) attaching the center seat (1) to the drivers seat and the passenger seat and discard.





7. Remove the nuts (4) attaching the center seat (2) to the drivers seat (3) and the passenger seat in the rear of the seat and discard.

8. Disconnect the electrical connector (1 - if equipped).

9. Roll the seat assembly forward and remove the center seat portion.