Installation

INSTALLATION - TURBOCHARGER OIL DRAIN TUBE - 5.9L




1. Raise vehicle on hoist.

NOTE: Lubricate o-rings and block bore prior to inserting the tube into the block.

2. Install new turbocharger oil drain tube O-rings. Lubricate O-rings with engine oil.
3. Install turbocharger oil drain tube into engine block.
4. Using a new gasket, install two oil drain tube mounting bolts. Tighten to 24 Nm (18 ft. lbs.).
5. Lower vehicle.
6. Connect negative battery cable.
7. Start engine and check for leaks.