Removal

REMOVAL




1. Disconnect and isolate the battery negative cable.

2. Remove the right side kick panel.

3. Disconnect antenna body cable (2) from instrument panel cable.

4. Securely tie a suitable length of cord or twine to the antenna half of the coaxial cable connector. This cord will be used to pull the cable back into position during installation.

5. Remove the antenna mast.

6. Remove the antenna cap nut (1) using an antenna nut wrench (Special Tool C-4816).

7. Remove the antenna adapter (4).

8. With the right door open, pull the antenna body assembly out through the opening between the fender and body.