Installation

INSTALLATION

REAR MOUNTED FUEL TANK




1. If fuel pump module (gas), or fuel tank module (diesel) is being installed, refer to Fuel Pump Module Installation. This must be done before installing tank.

2. Position fuel tank into fuel tank skid plate.

3. Place assembly to a hydraulic jack.

4. Raise assembly up to frame.

5. Install bolts (2) and tighten to 55 Nm (41 ft. lbs.) torque.




6. GAS POWERED: Connect quick-connect fittings (9) and (10).




7. DIESEL POWERED: Connect fuel return and supply line quick-connect fittings (1) and (2).




8. Connect electrical connector (1) to module (3).




9. Fit fuel fill hose assembly (3) to tank fittings.

10. Install both clamps (2).

11. Install ground wire screw (5) and ground wire (4).

12. Fill tank and check for leaks.


SIDE (MID-SHIP) MOUNTED FUEL TANK




1. If fuel pump module (gas), or fuel tank module (diesel) is being installed, refer to Fuel Pump Module Installation. This must be done before installing tank.

2. Place assembly to a hydraulic jack.

3. Raise assembly up to frame.

4. Install tank straps (4).

5. Install strap nuts (5) and tighten to 41 Nm (30 ft. lbs.) torque.




6. GAS POWERED: Connect fuel supply line (3) and vapor line quick-connect fittings (5).




7. DIESEL POWERED: Connect fuel return and supply line quick-connect fittings (4) and (5).




8. Position hoses (4) and (6) to tank fittings.

9. Tighten clamps (3).




10. Connect electrical connector (1) at top of module.

11. Fill tank and check for leaks.