Removal

REMOVAL




1. Remove the inner belt molding.

2. Remove the waterdam.

3. Reinstall the manual window crank or reconnect the electric window switch to the door wire harness (depending on application) and raise the door glass to the position shown.

4. Remove the two nuts (1) that secure the door glass to the window regulator (2) through the two sight windows (3 and 4) and disengage the door glass from the regulator.





5. Remove the two bolts (2 and 3) that secure the front glass run channel (1) to the door (5) and remove the run channel through the door panel opening (4).

6. Disengage the door glass from the window regulator and lower the glass into the door.

7. Carefully rotate the door glass within the door and remove the glass from the window opening.