Outside Rearview Mirror Glass - Removal

REMOVAL

STANDARD MIRROR






WARNING: Always wear eye and hand protection when servicing the mirror assembly. Failure to observe this warning may result in personal injury from broken glass.

1. Position the glass (3) in the mirror (2) as shown to access the two outboard mirror housing retainer clips (1).





2. Disengage the three mirror housing retainer clips (2) (start with the two outboard clips) and remove the cover.





3. Disengage the lower glass retainer clip (2) from the mirror motor.

4. Slide the mirror glass (1) upward from the mirror motor and remove the glass from the motor.


NOTE: When disconnecting the wire harness connectors from the heated mirror glass terminals, note the location of each connector and its respective terminal for installation reference.

5. If equipped with heated mirrors, disconnect the wire harness connectors from the mirror glass.


TOW PACKAGE MIRROR





6. Position the glass (3) in the mirror (1) as shown to access the inboard mirror glass retainer clip (2).





7. Disengage the retainer clip (3) and separate the mirror glass (2) from the mirror motor.


NOTE: When disconnecting the wire harness connectors from the heated mirror glass terminals, note the location of each connector and its respective terminal for installation reference.

8. If equipped with heated mirrors, disconnect the wire harness connectors (1) from the mirror glass.